• <u id="qkpp5"></u>

    1. <p id="qkpp5"><nav id="qkpp5"><option id="qkpp5"></option></nav></p>
      <p id="qkpp5"><var id="qkpp5"></var></p>
    2. 玖玖av,国产成人精品777777,日韩无,成人亚洲精品一区二区三区嫩花,人妻2,好吊AV,内射网站,国产九九在线视频
      北京集智達智能科技有限責任公司
      免費會員

      VMC 100

      參  考  價面議
      具體成交價以合同協議為準

      產品型號

      品       牌

      廠商性質生產商

      所  在  地

      更新時間:2022-01-25 10:24:29瀏覽次數:394次

      聯系我時,請告知來自 智能制造網
      同類優質產品更多>
      VMC 100 7 All-In-One Vehicle Computer with ARM Cortex-A8 and OBDMultiprotocol主要特點·7 WVGA TFT LCD Monitor with resistor touch screen·ARM Cortex-A8 Processor with 720MHz frequency·Co......

      VMC 100, a 7-inch all in one vehicle computer, is designed for the cost-effective solution for transportation application. Same as all VMC series, the fanless and wide temperature support are reserved in VMC 100 design. VMC 100 adopts Linux and Android system with Cortex®-A8 processor, it integrates the high resolution LCD with the brightness of 400 nits and 4-wire resistive touch sensor. VMC 100 is equipped with Bluetooth, Wi-Fi and WWAN for option, provide the connection capability for real-time communication. It provides RS-232/422/485, USB 2.0, GPIO and LAN signal to link with the peripherals. Its mounting hole is compatible with VESA75 and can be installed in the vehicle with limited space via RAM mount kits.

      General

      Cooling System: Fanless

      Enclosure: Plastic PC + ABS

      Mounting: Support VESA 75, stand mounting

      Four SMA Type antenna connectors of BT/Wi-Fi /WWAN/GPS

      Power Input: 9 ~ 36VDC input with Ignition

      Power Consumption: 15W

      Ingress Protection: Front panel IP54

      Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")

      Weight: TBD

      LCD Panel

      7-inch TFT LCD Panel with LED Backlight

      800 x 480 pixels (WVGA)

      Brightness: 400 cd/m2 (typical)

      Contrast ratio: 600:1 (typical)

      Touch Screen Sensor

      4-wire resistant touch

      Anti-glare coating surface

      Transmission rate: 78 ± 3%

      CPU & Chipset

      On-board DDR3 512MB

      Expandable Storage

      1 x Micro SDHC Slot (Bundle with 8GB)

      Expansion

      1 x Pin Head for WLAN option1 x mini-PCIe socket ((USB + UART) for WWAN option)OBD option and support protocols
      - ISO 15765-4, ISO 14230-4, ISO 9141-2, SAE J1850
      - ISO 15765, ISO 11898
      - SAE J1939Battery module option

      I/O Interface-Front

      F1 ~ F5 functions keyLight SensorInternal Mic-in2 x Built-in 2W speakers3 x LED indicators (Power mode, Storage and WWAN status)

      I/O Interface-Lateral

      Right side
      - 1 x Micro SD card socket
      - 1 x SIM card socket
      - 1 x USB 2.0 host type A connector
      - 1 x Mic-in, Line-outLeft side
      - 1 x Power button
      - 1 x System reset button
      - Volume up/down or Brightness up/dow

      I/O Interface-Rear

      1 x 5-pin Circular connector for Power/Ignition input1 x RJ45 for LAN1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)1 x DB9 (Male) for
      - RX/TX or RS-485
      - 2 x CAN Bus 2.01 x DB15 (Female) for
      - GPS dead reckoning interface (optional)
      - 3 x GPO, 3 x GPI

      Communication Module

      1 x On board GPS module1 x WLAN or Bluetooth module for optional1 x WWAN module for optional

      Power Management

      Selectable boot-up & shut-down voltage for low power protection

      HW design ready for 8-level delay time on/off at user's self configuration

      Power on/off ignition, software detectable

      Operating System

      Linux Ubuntu (kernel V3.2.0)

      Environment

      Operating temperatures: Ambient with air -20°C to 60°C??

      Storage temperatures: -30°C to 80°CRelative humidity: 10% to 90% (non-condensing)Vibration (random): 3g @5 ~ 500Hz

      Vibration
      Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
      Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24

      Shock
      Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
      Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

      Power Design & Protection

      Load dump and inductive load protection

      Cold cranking protection

      Transient voltage protection

      Electrostatic discharge protection

      Standards/Certifications

      EMC
      - CE, FCC class BPower
      - SAE J1113
      - SAE J1455
      - ISO 7637-2Safety
      - EN 60950-1 LVD

      會員登錄

      ×

      請輸入賬號

      請輸入密碼

      =

      請輸驗證碼

      收藏該商鋪

      X
      該信息已收藏!
      標簽:
      保存成功

      (空格分隔,最多3個,單個標簽最多10個字符)

      常用:

      提示

      X
      您的留言已提交成功!我們將在第一時間回復您~
      在線留言